|
|
Slow Internet Speed After Two Hard Drives - as it pertains to internet | ||
Discussion by spawn_syxx9 with 13 Replies.
Last Update: March 16, 2005, 10:04 am | |||
![]() |
|
|
Well it seems that my internet is actually slower though all the network and everything is telling me it is working at 100%. I have dial up netscape internet service. Is it actually slow? Or is it the fact that I live in an area where fast connection really isn't in high demand thus no matter what my dial up connection would be slow?
What are your opinions.
I couldn't understand anything about the network and speed and all. You will have to explain clearly.
It doesn't have to be a permanent thing, I don't know alot about dial-up, but the basics are the same, every connection has a low peak and a high peak. It could be that you were experiencing the slowness in a low peak.
Also, if your dial-up is not on high demand, you would nearly have a dedicated dial-up connection (that actually sounds faster!), meaning it would be faster then the average dial-up. The problem would more be on the other side, where it is on high demand, the more people connect, the slower the connection will be (at that time)
So therefore rebooting harddrives with windows doesn't make sense.
Also, you can have as many harddrives as you want, it is the easiest way to increase your disk space. Old Parallel ATA interfaces generally support a maximum of 4 drives (these include any CD-ROM, DVD-ROM, CD-RWs) unless there is an extra controller on the motherboard in which case another 4 can be added.
from my experience, Home is lousy, really lousy, on networks and related.
but dial-up would be slow no matter what.
Yeah it probably is the damn dial up.
QUOTE
Alrighty ^^ thanx for the help. Well my friend was thinking that maybe since I now had two hard drives maybe the data threading was going to both and thus slowing it down. But apparently it shouldn't so yeah.Nothing to do with the internet, but if you have two hard drives, you can stripe them and it really boosts the hard disk access times.
Hope I could help.
QUOTE (stevey)
do you actually have windows xp installed on both the hard drives or do you have xp installed on only one drive and the other drive is just like a normal storage drive. please let me know before i could tell you what to do. and well narrow band sucks you should just probably move to broadband.What information do you get from that? And using XP on both drives doesn't make a difference. You can boot only to one of them.
QUOTE (canute24)
Ok I got it. If you have two drives connected to a common IDE channel then you will share the IDE speed. PATA has a maximum of 133Mbps so if you connect two drives to a IDE port then when both are accessed even though they can provide more data the PATA IDE will limit it to 133 or 100 or 66 depending on the PATA version. To get more speed you will have to use raid. Striping will increase your speed. Mirroring will increase your speed only while reading, not while writing.Hope I could help.
The fastest HDD today can have a maximum transfer rate of at most 50Mb/s, if you multiply that by 2 that is 100Mb/s which is well below the total bus bandwidth of ATA133. So therefore you will not lose any performance when you plug in two harddisks on the same channel.
Similar Topics:
Who Likes Portable Hard Drives
Turbo Charge Your Internet Connecti...
Internet Troubles With Comcast Mode...
Hardware Problem! (12)
|
(2) Myst 4
|
Loading...
HOME 






