31 replies to this topic

[iGuest]

i am interested in knowingClone A Sim Card.

Please guide me more about cloning a SIM card and how do I do it?What are the equipments required? and what type of SIM I can be cloned?

[iGuest]

Clone A Sim Card. - This is how to clone a sim card.Clone A Sim Card.Learn Sim Cloning--------------------------------------------------------------------------------IntroductionThis guide will help you "clone" your GSM SIM card and make unlimited copies of it by using either Gold Wafer Cards or 16F84a + 24C16 DIL. The "cloned" SIM card will work just like the original meaning you can make a call, send an SMS, manage phonebook and SMS messages too. You can use the "cloned" SIM and the original SIM simultaneously meaning both of your SIMs will have network and both can send SMS at the same time. However, only one of the active SIMs can make a phone call at any time. Simultaneous calls are not allowed because the call will immediately be disconnected by your Network Provider. Regarding recieving SMS from other people, only one of the SIMs will recieve the message. This is a "first-come-first-serve" basis and no bias is given to the original SIM. Obviously, the bills for the "cloned" SIM will also be reflected to the bills of the original SIM. Not all phones accept "cloned" SIMs. The Nok 9210 rejects cloned SIMs as well as most new 3G phones (and even some old ones...) Not all original SIMs can be "cloned" too because "cloning" requires that you should extract the Ki and IMSI from the original SIM and today the new GSM SIM cards are built will tougher protection algorithms. You may be able to get the Ki and the IMSI, but it will take you at least 8 hours for the latest SIMs. It could even take days...10 easy steps to 'clone' your GSM SIM ! Let us begin...(This is only applicable to Goldwafer Cards not to Silverwafer Cards)STEP 1 - Downloading software from the InternetSIM Scan 1.21 by Dejan Kaljevic --> Sim Scan 1.21TwinSim 1.0 by lotfi17 --> TwinSim.ZipIC-Prog 1.04 by Bonny Gijzen -->Http://www.Ic-prog.Com/icprog.ZipWinPhoenix 1.06 by Paul Arnold and Joos Design --> Winphoenix.ZipWinPhoenix EEPROM Loader --> Loader.ZipHEX to BIN Converter --> Hex2bin.ZipSTEP 2 - Building your own GSM SIM Reader/Writer HardwareSIM Reader = SIM SCAN - Smart Mouse Compatible --> SchematicsSIM Writer = JDM Programmer --> Schematics////Don't have time to build this? Buy ready-made here.////STEP 3 - Buying or making your own blank SIM cardsMake your own 16F84A + 24C16 DIL --> Schematics////Don't have time to build this? Buy Goldwafer cards here.////STEP 4 - Getting the Ki and IMSI of the original SIMInstall Sim Scan 1.21 by running the install.Bat file.Run and configure Sim Scan from c:sim_scansetup.Bat file.Screen 1: Press Alt+Enter Key, then select the COM port where SIM Reader isConnected. SIM Scan will not work properly unless it is maximized to full screen.Screen 2: Select baud rate (choose 9600 bps 3.57 Mhz)Screen 3: Put original SIM card to SIM Reader and press EnterScreen 4: Press 'F5' - Get IMSI and Ki. Sim Scan will automatically create par2.BinFile as part of installation. This will take about 40 minutes on a fast computer.Screen 5: Select 'F2' or 'F3' (Do not use 'F1' unless you know what you are doing.)'F3' Retrieves 75% of SIMs even year 2001 GSM SIMs, but it is slow.'F2' Retrieves 50% of SIMs even year 2001 GSM SIMs and it is faster.////If the Ki and IMSI cannot be retrieved using 'F2', you can switch to 'F3'////The process of getting the Ki and the IMSI from the original SIM usually takes from4 hours to 3 days depending on the type of GSM SIM. You can exit at anytime andYou can resume whenever you want, Sim Scan will start from where you last finished.After the Ki and the IMSI has been retrieved, a file named c:Imsi_ki.Dat will beCreated and by using Notepad to open it you will see similar to screen below.Step 5 - Creating the HEX files for the "clone" SIMRun TwinSim 1.0 and select 'Single-Sim' then input the Ki and theIMSI that you got from the original SIM. For 'PIN' enter any 4Digits and for 'PUC' enter any 8 digits. After inputting all dataNeeded, click 'Generate Picfile' and 'Generate Epromfile' thenExit the program. Two HEX files will be generated in the folderWhere TwinSim is located (pic16f84.Hex + eprom.Hex).Step 6 - Converting the eeprom.Hex to eeprom.BinThe eeprom.Hex and hex2bin.Exe files must be placed on the same directory. Run hex2bin.ExeAnd copy the settings from the screen below. Now a new file 'eeprom.Bin' will be created.Step 7 - Burning the EEPROM Loader to the Goldwafer.Run IC-Prog 1.04 and configure it to work with the SIM Writer which is a JDM hardware.Choose 'Settings' --> 'Hardware' then choose correct COM port where SIM WriterIs connected.After setting up the hardware, put the blank Goldcard to the SIM Writer and select16F84A from the chip list.Now load the 'Winphoenix Loader.Hex' by selecting 'File' --> "Open File'.After loading the file, click the program all button (the one with the thunder icon).Step 8 - Burning the eeprom.Bin to the Goldcard.Put the Goldcard which you used from IC-Prog to the SIM Reader andThen run WinPhoenix 1.06. Other versions of WinPhoenix might not workSo make sure that you are using version 1.06. Configure the COM portWhere the SIM reader is connected. This can be done using the'File' --> 'Preferences' and seleting 'General' Tab.Select 'File' --> 'Load' and choose eeprom.Bin.Select 'Card' --> 'Program' and the eeprom.Bin will be written to the Golwafer's 24C16.Step 9 - Burning the pic16f84.Hex to the Goldwafer.Put the Goldwafer to the SIM writer hardware and run IC-Prog 1.04 again.Follow the same steps as described in Step 7, but this time load the pic16f84.HexFile instead. You can program this card with 'CP' enabled or disabled, it does not matter.Step 10 - Testing the 'cloned' SIM to your phone.Insert the 'cloned' SIM to your phone and enter the PIN code which you wrote earlierUsing the TwinSim 1.0 program. Wait for the phone to register to the Network and nowYou are done.-reply by DSGURJAR

 

[iGuest]

Clone of SIM cardClone A Sim Card.

Hi,

Is the cloning process valid for the UK?

I've heard that UK SIM Cards can't be cloned. But if you know a way to clone them can you please send me details?

Many thanks,

-reply by Pipoka

[iGuest]

interestingClone A Sim Card.

Nice, if you really wanna clone just buy the hardware and use it . I'm in ghana and bought a card programmer(TIPROG+silver cards)  from russia. Clonning is really cool.Just buy the stuff and start clonning and believe me you will learn a lot.

I suggest you use  SIM_EMU_6.01_CFG_v2.+ simscan.Or xsim. They quite simple and easy to use.Sim scan v2 is quicker in obtaining ki  than xsim. For me simscan  took just 1 hour whilst xsim 8 hours.

-reply by billgale

[iGuest]

Sim card cloning Clone A Sim Card.

I have a USB sim card reader. But it is not responding with Sim Scan or Sim Edit software. It is provided with a CD but the software (provided in cd) can  read and write contacts only. Please help me out!

-question by Pawan

[iGuest]

?piggyback?Clone A Sim Card.

Hi.

I would like to "piggyback"an existing Vodafone sim card.

Not sure if this is the correct expression?.

This is not an iphone just your normal mobile.

I want to read all the sms sent to the card,see the sms that have been deleted and I would like to see the sent sms. 

Is it possible to somehow link another sim card with the excisting sim so that I can do all of the above without upsetting anything?.Basically run the new sim side by side with the old sim.So they both work together and have all the imformation sent to both of them,the new sim being a "ghost "if you like.

I could then remove the "ghost sim" and access the sms and calls etc to my PC.

Is there any software I could use also?.

I have SIM RECOVERY PRO  V1.2.2 which is useless so I have a card reader with it I can use.

All the SIM RECOVERY PRO v1.2.2 can do is see whats on the card at that time.I would like to see whats been deleted and sent too.

Hopefully someone out there can help me?.

Thanks.

[iGuest]

Reply to post article.Clone A Sim Card.

In the world we have scammers and noble, I am a noble man and refused to act like a crook. In order to embedd yourself among crook u need to understand their mind set, speak their language and then eat in the same restaurant their go. Our duty isn't to defraud our government but to protect our national interest in form of acquisition. Meanwhile, while you collect non collectable one has to be self conscious about risk and liability. Second by doing so one conducts a check and balances of his own backyard, set the example for predecessor to follow. If u and I join together to fight fraud America will be a safe place to live.

 

Thanks, hope to read you soon,

Robert Trap17

-reply by Robert